Uddeholm Vanadis 60 SuperClean

EXCELLENT WEAR RESISTANCE FOR LONG RUN TOOLING

This is a high alloyed high performance PM high speed steel with an addition of cobalt. Uddeholm Vanadis 60 SuperClean is particularly suitable for cold work tooling where highest wear resistance and highest compressive strength are required at the same time. In east/south east asian countries served by Assab Uddeholm Vanadis 60 SuperClean is sold as Assab PM 60 Superclean.

  • Excellent wear resistance for long run tooling
  • Highest hot hardeness and temper back resistance
  • Highest compressive strength

Reference grade AISI D2 / AFNOR Z230 KDWVC 11.7.7.7.4

  • Highest hardness 68-70 HRC
  • Good dimensional stability
  • Good temper back resistance
steel tool part for blanking

Reference grade

  • Abrasive wear resistance 55%
  • Adhesive wear resistance 25%
  • Ductility/edge chipping resistance 20%
  • Toughness/gross cracking resistance 10%

Chemical composition

C Cr Mo V W Co
2.30 4.20 7.00 6.50 6.50 10.50

Contact us for further information

Contact us